DE & DTE Series //
DOWNLOAD: Product Brochure
  • SIMPAC DE & DTE Series
  • SIMPAC DE & DTE Series
  • SIMPAC DE & DTE Series
  • SIMPAC DE & DTE Series
  • SIMPAC DE & DTE Series
  • SIMPAC DE & DTE Series
  • SIMPAC DE & DTE Series

Overview

  • Type: forming, eccentric presses
  • Press Capacity: 300-3,375 tons
  • Part Size: medium to large
  • Slide Kinematics: mechanical
  • Application: cutting, blanking, bending, punching, stamping, embossing & forming


Description

The mechanical drive of the DE and DTE Series is ideal for flat and semi-flat parts due to its sinusoidal slide motion curve. The Series can be installed as a single press in progressive or transfer mode or as a fully automated press line. 

Features & Benefits

  • Proven and continuously optimized technology for reliable production processes.
  • The mechanical drive of the DE and DTE Series is ideal for cutting, punching, bending, and stamping operations.
  • The solid, low-stress annealed press bodies are FEM-calculated and optimized by “hot-spot analysis” areas subject to higher loads.
  • Presses in tie rod design are connected to a rigid frame via hydraulically pre-stressed tie rods.
  • The outside located pressure points, as well as an 8-fold slide guiding system, absorb off-center loads, spare press, and dies to ensure consistent part quality.
  • The automatic centralized lubrication system increases productivity and availability.
  • Availability of an extensive range of optional equipment (i.e., die cushions, pneumatic ejectors, or moving bolsters for a faster die change). 


Technical Specifications

Metric Imperial

DE2P Series

Model DE2P-400 DE2P-600 DE2P-800 DE2P-1000 DE2P-1200 DE2P-1400
Press Capacity Press Capacity ton ton 440 400 660 600 880 800 1100 1000 1320 1200 1540 1400
Rated Tonnage Point Rated Tonnage Point in mm 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13
Stroke Rate Stroke Rate spm spm 70 70 50 50 40 40 35 35 30 30 27 27
Stroke Length Stroke Length in mm 28 700 28 700 28 700 28 700 28 700 28 700
Slide Adjustment Slide Adjustment in mm 24 600 24 600 24 600 24 600 24 600 24 600
Die Height Die Height in mm 47 1200 47 1200 47 1200 47 1200 47 1200 47 1200
Slide Dimension Slide Dimension in mm 110x63 2800x1600 110x63 2800x1600 118x71 3000x1800 118x71 3000x1800 118x71 3000x1800 118x71 3000x1800
Bolster Dimension Bolster Dimension in mm 110x63 2800x1600 110x63 2800x1600 118x71 3000x1800 118x71 3000x1800 118x71 3000x1800 118x71 3000x1800
* SDAU = slide stroke down, adjustment up | 2P = 2-point design | 4P = 4-point design | Subject to technical modifications

DE4P Series

Model DE4P-400 DE4P-600 DE4P-800 DE4P-1000 DE4P-1200 DE4P-1500 DE4P-2000 DE4P-2500
Press Capacity Press Capacity ton ton 440 400 660 600 880 800 1100 1000 1320 1200 1650 1500 2200 2000 2750 2500
Rated Tonnage Point Rated Tonnage Point in mm 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13
Stroke Rate Stroke Rate spm spm 70 70 50 50 40 40 35 35 30 30 27 27 27 27 27 27
Stroke Length Stroke Length in mm 28 700 32 800 32 800 32 800 32 800 32 800 32 800 32 800
Slide Adjustment Slide Adjustment in mm 24 600 24 600 24 600 24 600 24 600 24 600 24 600 24 600
Die Height Die Height in mm 51 1300 51 1300 51 1300 51 1300 51 1300 51 1300 51 1300 51 1300
Slide Dimension Slide Dimension in mm 126x79 3200x2000 126x83 3200x2100 126x83 3200x2100 134x91 3400x2300 134x91 3400x2300 177x98 4500x2500 177x98 4500x2500 177x110 4500x2800
Bolster Dimension Bolster Dimension in mm 126x79 3200x2000 126x83 3200x2100 126x83 3200x2100 134x91 3400x2300 134x91 3400x2300 177x98 4500x2500 177x98 4500x2500 177x110 4500x2800
* SDAU = slide stroke down, adjustment up | 2P = 2-point design | 4P = 4-point design | Subject to technical modifications

DTE Series

Model DTE2-500 DTE2-1000 DTE2-1500 DTE4-1500 DTE4-2000 DTE4-2500 DTE4-2600
Press Capacity Press Capacity ton ton 550 500 1100 1000 1650 1500 1650 1500 2200 2000 2750 2500 2860 2600
Rated Tonnage Point Rated Tonnage Point in mm 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13
Stroke Rate Stroke Rate spm spm 50 50 35 35 27 27 27 27 27 27 27 27 27 27
Stroke Length Stroke Length in mm 18 450 24 600 24 600 28 700 28 700 32 800 32 800
Slide Adjustment Slide Adjustment in mm 12 300 24 600 24 600 24 600 24 600 24 600 24 600
Die Height Die Height in mm 47 1200 47 1200 47 1200 47 1200 47 1200 47 1200 47 1200
Slide Dimension Slide Dimension in mm 118x47 3000x1200 158x67 4000x1700 177x67 4500x1700 217x98 5500x2500 248x95 6300x2400 248x95 6300x2400 248x95 6300x2400
Bolster Dimension Bolster Dimension in mm 118x47 3000x1200 158x67 4000x1700 177x67 4500x1700 217x98 5500x2500 248x95 6300x2400 248x95 6300x2400 248x95 6300x2400
* SDAU = slide stroke down, adjustment up | ST = standard | HS = high-speed | LS = long stroke | Subject to technical modifications

Your experience on this site will be improved by allowing cookies. For more information, please read our Data Protection Policy

Allow Required