DL & DTL Series //
DOWNLOAD: Product Brochure
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series
  • SIMPAC DL & DTL Series

Overview

  • Type: forming, link presses
  • Press Capacity: 600-3,375 tons
  • Part Size: medium to large
  • Slide Kinematics: link
  • Application: stamping, drawing & forming 

Description

The modified slide kinematics of the DL and DTL Series is ideal for parts requiring a higher drawing depth. The Series can be installed as a single press in progressive or transfer mode or as a fully automated press line. 

Features & Benefits

  • Proven and continuously optimized technology for reliable production processes.
  • The link drive of the DL and DTL Series reduces the slide velocity during the forming phase, providing the perfect solution for parts with higher drawing depths.
  • The solid, low-stress annealed press bodies are FEM-calculated and optimized by “hot-spot analysis” areas subject to higher loads.
  • Presses in tie rod design are connected to a rigid frame via hydraulically pre-stressed tie rods.
  • The outside located pressure points, as well as an 8-fold slide guiding system, absorb off-center loads, spare press, and dies to ensure consistent part quality.
  • The automatic centralized lubrication system increases productivity and availability.
  • Availability of an extensive range of optional equipment (i.e., die cushions, pneumatic ejectors, or moving bolsters for a faster die change).

Technical Specifications

Metric Imperial

DL2P Series

Model DL2P-600 DL2P-800 DL2P-1000 DL2P-1200 DL2P-1400
Press Capacity Press Capacity ton ton 660 600 880 800 1100 1000 1320 1200 1540 1400
Rated Tonnage Point Rated Tonnage Point in mm 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13
Stroke Rate Stroke Rate spm spm 50 50 40 40 35 35 30 30 27 27
Stroke Length Stroke Length in mm 28 700 28 700 28 700 28 700 28 700
Slide Adjustment Slide Adjustment in mm 24 600 24 600 24 600 24 600 24 600
Die Height Die Height in mm 47 1200 47 1200 47 1200 47 1200 47 1200
Slide Dimension Slide Dimension in mm 110x63 2800x1600 118x71 3000x1800 118x71 3000x1800 118x71 3000x1800 118x71 3000x1800
Bolster Dimension Bolster Dimension in mm 110x63 2800x1600 118x71 3000x1800 118x71 3000x1800 118x71 3000x1800 118x71 3000x1800
* SDAU = slide stroke down, adjustment up | 2P = 2-point design | 4P = 4-point design | Subject to technical modifications

DL4P Series

Model DL4P-600 DL4P-800 DL4P-1000 DL4P-1200 DL4P-1500 DL4P-2000 DL4P-2500
Press Capacity Press Capacity ton ton 660 600 880 800 1100 1000 1320 1200 1650 1500 2200 2000 2750 2500
Rated Tonnage Point Rated Tonnage Point in mm 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13
Stroke Rate Stroke Rate spm spm 50 50 40 40 35 35 30 30 27 27 27 27 27 27
Stroke Length Stroke Length in mm 32 800 32 800 32 800 32 800 32 800 32 800 32 800
Slide Adjustment Slide Adjustment in mm 24 600 24 600 24 600 24 600 24 600 24 600 24 600
Die Height Die Height in mm 51 1300 51 1300 51 1300 51 1300 51 1300 51 1300 55 1400
Slide Dimension Slide Dimension in mm 126x83 3200x2100 126x83 3200x2100 134x91 3400x2300 134x91 3400x2300 177x98 4500x2500 177x98 4500x2500 177x110 4500x2800
Bolster Dimension Bolster Dimension in mm 126x83 3200x2100 126x83 3200x2100 134x91 3400x2300 134x91 3400x2300 177x98 4500x2500 177x98 4500x2500 177x110 4500x2800
* SDAU = slide stroke down, adjustment up | 2P = 2-point design | 4P = 4-point design | Subject to technical modifications

DTL Series

Model DTL2-1000 DTL2-1200 DTL2-1500 DTL2-2000 DTL4-1500 DTL4-2000 DTL4-2500 DTL4-2600
Press Capacity Press Capacity ton ton 1100 1000 1320 1200 1650 1500 2200 2000 1650 1500 2200 2000 2750 2500 2860 2600
Rated Tonnage Point Rated Tonnage Point in mm 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13 0.5 13
Stroke Rate Stroke Rate spm spm 35 35 30 30 27 27 27 27 27 27 27 27 27 27 27 27
Stroke Length Stroke Length in mm 24 600 24 600 24 600 26 650 28 700 28 700 32 800 32 800
Slide Adjustment Slide Adjustment in mm 24 600 24 600 24 600 24 600 24 600 24 600 24 600 24 600
Die Height Die Height in mm 47 1200 47 1200 47 1200 47 1200 47 1200 47 1200 47 1200 47 1200
Slide Dimension Slide Dimension in mm 158x67 4000x1700 158x67 4000x1700 177x67 4500x1700 177x95 4500x2400 217x98 5500x2500 248x95 6300x2400 248x95 6300x2400 248x95 6300x2400
Bolster Dimension Bolster Dimension in mm 158x67 4000x1700 158x67 4000x1700 177x67 4500x1700 177x95 4500x2400 217x98 5500x2500 248x95 6300x2400 248x95 6300x2400 248x95 6300x2400
* SDAU = slide stroke down, adjustment up | 2P = 2-point design | 4P = 4-point design | Subject to technical modifications

Your experience on this site will be improved by allowing cookies. For more information, please read our Data Protection Policy

Allow Required